|
|
| |
|
 |
Automotive Hand Tools: Sockets and Bits
Chain Auto Tools is a supplier of high quality automotive tools useful in servicing
a wide range of auto parts. View our range of sockets (some single sockets, some
socket sets):
Sockets: |
|
|
1/2" HYDRAULIC TORSION DUAL TORQUE IMPACT WRENCH (TWIN HAMMER)
Torque control impact wrench! You can control the torque from 60 Nm (44 ft/lbs) to 220 Nm (162 ft/lbs). Prevent the over-torque on the wheel cover. |
|
SSR751I
|
1/2"
DR. 11PC THIN WALL DEEP IMPACT SOCKET SET
Sizes: 17, 19, 21, 22, 23, 3/4", 13/16", 7/8",
15/16", 1" 1-1/6" X 85mm (L). Material: CR-MO |
|
SSR405I-MM
|
1/2"
DR. 3PC THIN WALL DEEP SOCKET SET
Sizes: 17, 19, 21mm X 85mm (L).
Material: CR-M + Anoized Finish |
|
3PC 1/2"DR. HYDRAULIC TORSION DUAL TORQUE IMPACT SOCKET
3 size (17mm, 19mm, and 21mm) in one set of Hydraulic Torsion Dual Torque Impact Sockets. The length of the Hydraulic Torsion Dual Torque Impact Socket is 100mm. Quality alloy steel applied (CR-MO). |
|
4PC 1/2"DR. HYDRAULIC TORSION DUAL TORQUE IMPACT SOCKET
3 size (17mm, 19mm, and 21mm) plus 1pc 1/2" adapter socket and in one set of Hydraulic Torsion Dual Torque Impact Sockets. Quality alloy steel applied (CR-MO). |
|
3PC 1/2"DR. TORSION LIMITED IMPACT SOCKET (THIN WALL)
3 size (17mm, 19mm, and 21mm) in one set of Torsion Limited Impact Sockets (Thin Wall). Max. torque is 100Nm. Application from Japan's car. Quality alloy steel applied (CR-MO). |
|
3PC 1/2"DR. TORSION LIMITED IMPACT SOCKET W/SLEEVE
3 size (17mm, 19mm, and 21mm) in one set of Torsion Limited Impact Sockets. These sockets comes with white plastic sleeve. Max. torque is 100Nm. Quality alloy steel applied (CR-MO). |
|
|
5PC
1/2" DR. EXTENSION BAR SET
Extension bar for 1/2" drive square impact socket. CR-MO
material used. The center indicator line on the bar for keeping
away from over torque. |
|
SSA011E
|
1"
DRIVE 5PCS BUDD WHEEL SOCKET SET
The extra deep design lets you remove both nut and stud with
just the one socket. |
|
L TYPE EXTENSION BAR WHEEL MASTER LUG WRENCH (WITH LED FLASH LIGHT)
Very useful for working dark place. Includes four most common used scokets (17, 19, 21, 23mm) |
|
SSA060C
|
WATER
PUMP SOCKET
Varied size of sockets are available. |
|
AMR154I
|
7PC
OXYGEN SENSOR SWITCH SOCKET SET
7pc sockets set allow you to work on varied kind of vehicles. |
|
SSA151L
|
OIL
PRESSURE SENDING UNIT SOCKET
Two-step design can fit 1" and 1-1/16" oil pressure
sending units.. |
|
SSA152L-1
|
OIL
PRESSURE SENDING UNIT
For late model GM's with oil pressure gauges. |
|
SSA202L
|
VACUUM
SWITCH SOCKET
Remove and installs oxygen sensors easily. |
|
|
18PCS
TWIST BIT SOCKET & LOCKING NUT SOCKET
8PCS 1/2" DR TWIST BIT: 40 mm (L) 2-3-4-6 & 75mm (L)
8-10-12-14
9PCS 1/2" DR LOCKING NUT SOCKET: 10-11-12-13-14-15-16-17-19
mm |
|
|
9PCS
HEX SOCKET SET
75mm length. Size: 4-5-6-8-10-12-14-17-19mm |
|
|
9PCS
SPLINE (12 POINTS) SOCKET SET
75mm length. Size: 5-6-7-8-9-10-12-13-14mm |
|
|
9PCS
RIBE SOCKET SET
75mm length. Size: 5-6-7-8-9-10-12-13-14mm |
|
|
9PCS
STAR SOCKET SET
75mm length. Size: T20. 25, 27, 30, 40, 45, 50, 55, 60 |
|
|
7PCS
BOLT TWIST SHANK
35mm length. 13mm x 35 mm #2, 3, 4, 6; 17mm x 35mm #8, 10, 12 |
|
|
1/2"
DR. STEP WRENCH (for valve nipples)
SIZE: 3/8" (9.6mm) - 29/64" (11.6mm) - 31/64"(12.3mm)
-21/32" (16.4mm) - 53/64" (21.04mm). Step wrench for
valve nipples. |
|
|
6PC
1/2" DR. SOCKET BIT SET
RIBE bit size: 8, 10, & 12 x 140mm long
TORX bit size: T50, T55, & T70 x 140m long |
|
|
90
DEGREE SOCKET ADAPTER
Body material is applied for 50BV30 and bar material for #6150.
Your OEM idea for socket adapter is welcome. |
|
|
45
DEGREE SOCKET ADAPTER
Body material is applied for 50BV30 and bar material for #6150.
Your OEM idea for socket adapter is welcome. |
|
OXYGEN SENSOR WRENCH
This double-square drive wrench easily installs or removes oxygen sensors located in the exhaust manifold without rounding them off. |
|
4PCS OXYGEN SENSOR SOCKET SET
4pcs sockets set allow you to work on varied kind of vehicles. |
|
11PCS SENSOR AND SENDING UNIT SOCKET SET
11pcs sockets set allow you to work on varied kind of vehicles. |
|
8PCS OXYGEN SENSOR SOCKET SET
8pcs sockets set allow you to work on varied kind of vehicles. |
|
CADILLAC/AURORA WATER PUMP R&R SCKET
Design to remove and install the water pump on Cadillac Northstar 4.6 liter V8 engines from 1993; and Oldsmobile Aurora 4.0 liter V8 engine from 1995 and later. |
|
10PCS 1/2' IMPACT SOCKET SET(MM)
Sizes: 11, 12, 13, 14, 16, 17, 19, 21, 22, 24mm
Material: CR-MO + Black Oxided |
|
8 PCS 3/4" IMPACT SOCKET SET(MM)
Sizes: 26, 27, 29, 30, 32, 35, 36, 38mm
Material: CR-MO + Black Oxided |
|
8 PCS 1" IMPACT SOCKET SET(MM)
Sizes: 24, 27, 30, 32, 33, 36, 38, 41mm
Material: CR-MO + Black Oxided
|
|
4PCS DIESEL INJECTOR SOCKET
For use on: ALFA ROMEO, CHRYSLER, BMW, FORD, VW, MERCEDES, AUDI, OPEL, VAUXHALL, SEAT, VOLVO, ROVER, also on VOLOV, MAN 2.5TD & SCANIA HGVS. |
|
4PCS INJECTOR SOCKET SET
A four piece toothed injector Socket Set for use in Commercial vehivles. Also suitable for some Iveco, Scania and Renault commercial vehicles. |
| |
|
Bits: |
|
|
5.0mm PRY SOCKET BIT
1/2" DR. x 60mm (L). 5.0mm breadth. Ply Width 7.0mm. |
|
H7 SPECIAL SOCKT BIT
1/2" DR. x H7 x 100mm (L) |
|
H7 SPSCIAL SOCKET BIT
1/2" DR. x H7 x 140mm (L) |
|
6PC
1/2" DR. SOCKET BIT SET
RIBE bit size: 8, 10, & 12 x 140mm long
TORX bit size: T50, T55, & T70 x 140m long |
|
65mm CNC MACHINED TORSION DOUBLE ENDED POWER BIT
S2 material with sanding chrome plated. |
|
65mm CNC MACHINED TORSION DOUBLE ENDED POWER BIT WITH MAGNETIC FIXING SCREW HOLDER
S2 material with sanding chrome plated. |
|
110mm CNC MACHINED TORSION DOUBLE ENDED POWER BIT
S2 material with sanding chrome plated. |
|
110mm CNC MACHINED TORSION DOUBLE ENDED POWER BIT WITH MAGNETIC FIXING SCREW HOLDER
S2 material with sanding chrome plated. |
|
3PC STAR BIT SOCKET SET FOR DISK BRAKE CALIPERS
Star bit sockets includes T40, T45, T50 with 3/8" square drive |
|
9PC STAR & HEX BIT SOCKET SET FOR DISK BRAKE CALIPERS
Includes Hex bits - 1/4", 3/8", 7mm, 8mm, 10mm & star bits - T40, T45, T50 (all come w/3/8" SQ. DR.). Also, specially includes Star bit T60 with 1/2" square drive. |
|
40PC 3/8" & 1/2" DR. PROFESSIONAL BITS SET
Bits including star, spline, hexagon, etc. Also, adapter come with this bits set. |
AMR671E
|
25PC
MULTY-SPLINE EXTRACTOR SET
|
|
18PCS 3/8" SQ. DR. MASTER DRAIN PLUG KEY SET
CR-V material applied. Including sliding T-bar handle. Comes with plastic case. |
|
12PC DRAIN PLUG KEY SET
Hex and square type of drain plug including 1pc T-bar. |
CPA020C
|
16PC
PUNCH & CHISEL SET
Professional punch and chisel set. High quality steel material applied.
|
BDB971C
|
25PC
SCREW EXTRACTOR/DRILL& GUIDE SET
These screw extractors do not expand the screw while turning
and their special design ensures a positive grip when driven
into the drilled out hole. |
|
114PC OIL DRAIN REPAIR KIT
Renew the diameter and replace a new oil drain plug. Six popular sizes fit nearly all applications. |
|
64PC OIL DRAIN REPAIR KIT
Renew the diameter and replace a new oil drain plug. Six popular sizes fit nearly all applications. |
|
OIL DRAIN REPAIR KIT (M13)
Renew the diameter and replace a new oil drain plug. Six popular sizes fit nearly all applications. |
|
OIL DRAIN REPAIR KIT (M15)
Renew the diameter and replace a new oil drain plug. Six popular sizes fit nearly all applications. |
|
OIL DRAIN REPAIR KIT (M17)
Renew the diameter and replace a new oil drain plug. Six popular sizes fit nearly all applications. |
|
OIL DRAIN REPAIR KIT (M20)
Renew the diameter and replace a new oil drain plug. Six popular sizes fit nearly all applications. |
|
OIL DRAIN REPAIR KIT (M22)
Renew the diameter and replace a new oil drain plug. Six popular sizes fit nearly all applications. |
|
|
|
|
|
|
CHAIN
auto tools & equipment supplies
