CHAIN Auto Tools >> specialized for motorcycles
   

Specially Manufactured Motorcycle Repair Tools and Equipment

Professional motorcycle repair tool set we supplya number of professional motorcycle repair tools that can be used for motorcycle. All of our products are made to our strict quality control management that meets ISO standards.

Item
Tool Description

BLIND HOLE BEARING PULLER SET
PUS234E

BLIND HOLE BEARING PULLER SET
Includes 8 pcs different size of attachments.

FLYWEEL PULLER
Easily extract motorcycle flywheel. Threads sizes are M10 - 1.25, M14-1.5, M16-1.5, M18-1.5 for inner cross bolts and M24-1.0, M27-1.0 for outer bolt.

ANGLE DRIVER FOR MOTORCYCLE
Works on motorcycle. It can reach a narrow space.
HEAVY DUTY VALVE SPRING COMPRESSOR (MOTO)
3 attachments for small to big motorcycles (19mm, 23mm, and 25mm). Capacity between valve is 130mm (50 & 90mm extension bolts included for more usages on different motorcycle
25PC MOTORCYCLE REPAIR TOOL KIT
Most popular motorcycle tools in one set. This repair kit come with durable plastic case.
PISTON DETACHING TOOL
16.5 mm to 40 mm capacity
PISTON DETACHING TOOL WITH ADJUSTING SCREW
This tool is purpose designed to detach a piston from the disk brake base of a motor vehicle. The adjusting screw design, which is able to adjust the distance between two grasping poor outer walls of the two holding blocks firmly press the inner wall of the piston, allows the open replace a piston or a washer with a new one.
CRANK CASE SEPARATOR
Pulls out two side type of crank case. CR-MO material applied. 22 mm to 120 mm capacity.
TIRE LEVER / PRY BAR
Useful tool on changing motorcycle tire. Ergonomic handle for comfortable use.
MOTORCYCLE PULLEY HOLDER
Firmly hold pulley when checking motorcycle engine. It prevents spinning when removing clutch pulley. For small to middle motorcycle.
RIM PROTECTOR
Prevents scratching on wheel when using tire lever to exchange tire. After finishing the change of tire, this protector is easily remove by pulling the attached rope.

chain puller
AMM576L

CHAIN PULLER
Specially shaped narrow jaws are designed to fit in between chain links to enable the chain lik to be removed or replaced.

Motorcycle Chain Brush
Easily cleans any motor cycle chains. Its body material is ABS plastic and brush material is nylon.
TAPPET ADJUSTING TOOL SET
Set contains three wrenches (8,9 & 10mm) and three adjuster (screw type and 3 & 4mm square-type). Interchange adjusters and wrenches provide nine different combinations. Ideal for most makers and models of motorcycles, ATV's and ATC's.
UNIVERSAL HOLDING TOOL (MOTO)
The clutch holding tool can be used to hold the inner clutch hub on most motorcycles and ATVs. It is only recommended on inner clutch hubs with "square-style" teeth. The tool can also be used to hold flywheels, gears, sprockets, and other parts for easier removal.
CHAIN BREAKER
This Chain Breaker is ideal and rssential tool for use in 420, 428, 520, 525 and 530 chain. The handle can be folded away for easy storage.
BELT TENSION GAUGE
This tool can be use to adjust belt tension on most motorcycles equipped with a secondary drive belt. This tool prividrs a simple way to confirm the belt for proper tension.
BRAKE AND CLUTCH CABLE INJECTOR
This tool is purpose designed to fix the brake and clutch cable when injecting the lubrication oil.
CLUTCH HUB AND ALTERNATOR PULLER
Ideal tools to remove the insicated clutch plates
FLYWHEEL PULLER
Puller kit designed to pull magneto flywheel or starter gear. Includes three 6 x 25mm and three 8 x 10mm bolt. Applications: Kawasaki Jet Ski 300/ 440/ 550, Yamaha WR250F 01-02 and WR400F Flywheel.
27MM MOTORCYCLE FLYWHEEL/MAG PULLER
Easily extract motorcycle flywheel.
TIRE VALVE CORE TOOL
For installation and removal of standard valve care.
T-HANDLE DISCLOSED TIRE REPAIR TOOL
T-handle disclosed tire repair tool is for inserting plugging material typically in the form of rubber coated strands, into a tire puncture.
SMALL MULTI-VALVE TOOL
These tools are porpose to save time necessary when replacing valves in modern 16- to 20- valve heads. Small tool works on valves of 4-and 5-valve-per-cylinder heads (5mm valve stem diameter or smaller).
LARGE MULTI-VALVE TOOL
These tools are porpose to save time necessary when replacing valves in modern 16- to 20- valve heads. Large tool works on valves of 4-valve-per-cylinder heads (5.5mm valve stem diameter or large with under 40 Ibs. seat pressure).
FORK CAP WRENCH
Designed to remove the fork caps and asjust compression dampening. On late-modle CRs. and RMs. 46mm & 50mm.
FLUID HOSE CLAMP
Completely or partially closes fleible brake, fuel, and vacuum, fluid line. All steel constriction with adjustable locking collar.
ADJUSTABLE PISTON RING INSTALLER
Makes installing piston rings safe and easy without over-expanding rings. Works on most common piston diameter.
OFF-ROAD TIRE TOOL
Good auxiliary tool for tire irons when replacing the tire of off-road wheels and also a must for installing tubes.
HONDA OIL FILTER AND CLUTCH HUB SPANNER
Designed for oil filter and clutch hub on many Honsa models.(single-cylinder and twin-cylinder machines). 3/8" driver and 24mm inside diameter.
SPOKE WRENCH FOR MOTORCYCLE
9pcs interchangable tipes. Wrench sizes are 5.2, 5.4, 5.6, 5.8, 3.0, 6.2, 6.4, 6.6, 6.8 mm. Hanle made by aluminum for light weight.
9PC FORK SEAL DRIVERS
Set contains three wrenches (8,9 & 10mm) and three adjuster (screw type and 3 & 4mm square-type). Interchange adjusters and wrenches provide nine different combinations. Ideal for most makers and models of motorcycles, ATV's and ATC's.
MOTORCYCLE COIL SPRING COMPRESSOR TOOL
Install the shock absorber on the device. Press the hydraulic handle until shock absorber spring is pressed and locked, and then operator could work easily.

 

Contact us with any questions you have about a specific tool or piece of equipment. Also if you are looking for a tool you don't see here we are fully capable of providing OEM solutions that will meet your specification. Our friendly and experienced customer service team is here for you with help, advice and consulting.

- Contact Us / Get a Quote

 

 


you can also browse our automotive hand tools by equipment type:

adapter/convertor | chisel & punch | clamp | compressor | cutter | disconnect tool | installer/remover |
pliers | puller | seal/valve tool | socket | tester/gauge | tuning/adjusting | vacuum lifter cups | wrench/ratchet


The Chain Enterprises company is Taiwan's leading manufacturer of OEM automobile tools, products, and accessories. With leading auto tool exporter services to international clients, we are your best choice if you need a supplier for your automotive wholesale business. Our manufacture of auto tooling is managed using a strict quality control process that is ISO approved. Contact us for more details of our solutions for wholesaler and distributor companies.

 

© 2003 - 2010 Chain Automotive Tools | +886-4-2436-1133 | site by www.GCT-Taiwan.com

auto tools supply
CHAIN auto tools & equipment supplies
OEM automotive hand tools manufacturer and supplier/exporter/distributor
automotive tools manufacturer
automotive hand toolsabout CHAIN Auto ToolsOEM automotive tool manufacturer FAQscontact our wholesale hand tools companyhand tools company newsautomotive hand tools catalogget a quote on our hand tools range