TANK LEAKAGE TESTER KIT

Item No:
AMR981I

Packing:
SLIDE CARD
72SET/12.00KG/13.00KG/2.00'/CTN

Instructions:

• Remove the lid of radiator. If the radiator is in high temperature, wait it cold down or cover wet towel until normal temperature.

• Select the correct Test Adapter, then screw on the radiator.

• Attach the correct Test Adapter, then screw on the radiator.

• Press the Hand Pump to inflate the pressure up to 15~20 PSI, Caution: do not exceed the Max. Press of gauge.

• Check the press guage. If the pointer is down, you must inspect the lines of radiator, then repair or replace the damage parts.

• After servicing press the release button to release the pressur of radiator until the pressure gauge to zero.

• Before storing:

  • Attach the test adapter to quick coupler of hand pressure pump, then press the hand pressure pumpt few times to push remnant water out the test adapter.

  • Drop pneumatic oil into the air hole of the hand pumpend to lubricate the piston of hand pump

• Be careful to use this tools and keep them clean.

Application:

• Large Truck
• GM (Cadillac & Buick)
• BENZ, Ford
• Vehicle 123 serious
• Jeep
• Peugeot
• Vehicle 124 serious (Mitsubishi, Nissan, Mazda, Toyota, Subaru, Infiniti, GEO, Suzuki, Isuzu, & Mitsubishi)
• Vehicle 125 serious (Honda, Toyota, Suzuki, Mitsubishi)
• Opel
• VW
• New VW
• Ford
• BMW
• SAAB
• Jaguar
• Volvo
• SAAB
• Audi
• Citron
• Renault
• Flat
• Alfa
• Rover
• International
• New Auudu A4, A5, & A6

Related Tools:

AMR652I

AMR653I