COOLING SYSTEM& RADIATOR CAP PRESSURE TESTER

Item No:
AMR652I

Packing:
BLOW CASE + LABEL + SLEEVE + SHRINK

Contents:
5 ADAPTERS + 2 CAP ADAPTERS + COOLING SYSTEM PUMP

Instructions:

• Remove the lid of radiator. If the radiator is in high temperature, wait it cold down or cover wet towel until normal temperature.

• Select the correct Test Adapter, then screw on the radiator.

• Attach the correct Test Adapter, then screw on the radiator.

• Press the Hand Pump to inflate the pressure up to 15~20 PSI, Caution: do not exceed the Max. Press of gauge.

• Check the press gauge. If the pointer is down, you must inspect the lines of radiator, then repair or replace the damage parts.

• After servicing press the release button to release the pressure of radiator until the pressure gauge to zero.

• Before storing:

  • Attach the test adapter to quick coupler of hand pressure pump, then press the hand pressure pumped few times to push remnant water out the test adapter.

  • Drop pneumatic oil into the air hole of the hand pumped to lubricate the piston of hand pump

• Be careful to use this tools and keep them clean.

Application:

• #1 Adapter: GM4 Cylinder (Buick, Chevrolet, Pontiac, Cadillac, etc.).
• #2 Adapter: Major Trucks.
• #3 Adapter: Mercedes Benz, Ford, Chrysler, GM, Jeep, Truck, Peugeot.
• #4 Adapter: Acura, Dodge, Eagle, Geo, Honda, Isuzu, Lexus, Mazda, Mitsubishi, Suzuki, Toyota, Infiniti, Nissan, GM (Nova, Spectrum, Sprint), Peugeot, Ford, Chrysler.
• #5 Adapter: Toyota, Honda, Mitsubishi, Suzuki, Chrysler, Acura, Dodge, GEO.
• Cap Adapters (x2): Testing the pressure cap

IMAGES:

Irrustration 1: How to set up this cooling system?
Irrustration 2: How to test pressure cap?

Related tools:
AMR653I
AMR981I