1/2" HYDRAULIC TORSION DUAL TORQUE IMPACT WRENCH (TWIN HAMMER)

Item No:
ATI013R

Packing:
Plain Box/ Label
6PCS/15KG/16KG/1.2'/CTN

Description:

• Forward Torque Control Range: 44 ft/lbs ~ 162 ft/lbs (60 Nm ~ 220 Nm)
• Control 1: 60-80 Nm (44-45 ft/lbs)
• Control 2: 105-125 Nm (77-92 ft/lbs)
• Control 3: 145-165 Nm (107-122 ft/lbs)
• Control 4:200-220Nm (148-162 ft/lbs)
• Forward Max. Torque: 400ft/lbs (540Nm)
• Reverse Max. Torque: 600 ft/lbs (810Nm)
• Square Drive: 1/2"
• Free Speed: 6000 R.P.M.
• Net Weight: 2.5 Kgs (5.5lbs)
• Avg. Air CONS: 4.5 CFM
• Working Pressure: 90 PSI
• Air Inlet: 1/4"
• Air Hose: 3/8" ID

Related Products:

ATI045R: AIR RATCHET WRENCH W/REAR EXHAUST
ATI046R: AIR RATCHET WRENCH W/REAR EXHAUST
ATI047R: AIR RATCHET WRENCH W/REAR EXHAUST
SSR751E: 11PC DEEP IMPACT SOCKET SET
SSR160V: 1/2" DR. 5PC CR-MO EXTENSION BAR SET
WRG198C: L TYPE EXTENSION BAR WHEEL MASTER LUG WRENCH (WITH LED FLASH LIGHT)
SSR668M: 10 PCS 1/2" IMPACT SOCKET SET(MM)
SSR669M: 8 PCS 3/4" IMPACT SOCKET SET(MM)
SSR667M: 8 PCS 1" IMPACT SOCKET SET(MM)
SSR760E: 3PC 1/2"DR. HYDRAULIC TORSION DUALTOROUE IMPACT SOCKET
SSR761E: 3PC 1/2"DR. TORSION LIMITED IMPACT SOCKET (THIN WALL)
SSR762E: 3PC 1/2"DR. TORSION LIMITED IMPACT SOCKET W/SLEEVE
SSR770E: 4PC 1/2"DR. HYDRAULIC TORSION DUALTOROUE IMPACT SOCKET
ATI010C: 1/2" DR. AIR IMPACT WRENCH

How to use the 1/2' DR. :

• Set up the working pressure at 90 PSI.
• Refer to picture "C", set the valve to "TORSION" position.
• Refer to picture "D" adjust the air control valve, then you can get output torque:
  1. 60-80 Nm (44-45 ft/lbs)
  2. 105-125 Nm (77-92 ft/lbs)
  3. 145-165 Nm (107-122 ft/lbs)
  4. 200-220Nm (148-162 ft/lbs)
• If other torque/torsion required, please adjust the "C" control valve.