DIESEL INJECTOR SEAT CUTTER SET

Item No:
AMM1755E

Material:
SKD11

Kit Contents:
15mm Flat reamer for universal injector
17mm flat reamer for delphi/bosch injectors(BMW/ PAS/RENAULT/ FORD)
17Mmm flat reamer for bosch injectors (Mercedes Crd)
17mm Angled resmer for fiat/ iveco
1PC T-Handle
1PC pilot Post

Packing:
EVA + Blow Case
12SET/ 15.5KGS/ 16.5KGS/ 1.5'/ CTN

Description:

• Identify injector "blow-by' exists (see previous page for possible symptoms)

• Gain access to the injectors and remove them

• Select required reamer onto pilot post and tighten internal hex screw

• Place assembled cutter into injector recess

• Using the T bar and socket supplied apply only a small amount of pressure whilst turning the cutter in a clockwise direction only. Use a small amount of light lubricant whilst performing the cut to only remove enough metal to form a good seat

• Thoroughly clean the seat and remove all sward

• Fit injectors as per manufactures instructions

Related Products:

SSA127E: 4PCS DIESEL INJECTOR SOCKET
SSA128E: 4PCS INJECTOR SOCKET SET
AMR778E-1: DIESEL COMPRESSION TESTER
PUG480E-1: DIESEL INJECTOR EXTRACTOR M8/M12/M14
AMM1756E: 8PC DIESEL INJECTOR SEAT CUTTER SET
AMM1757E: 9PC DIESEL INJECTOR SEAT CUTTER SET
AMM1758E: DIESEL INJECTOR SEAT CUTTER SET
AMM1774E: INJECTOR SEAT CLEANING SET