UNIVERSAL STRUT SPRING COMPRESSOR

Item No:
AMM374E

Capacity:
30 FT. LBS of torque on the actuating screw

Packing:
BLOW CASE
2SET/18.00KG/19.00KG/1.20'/CTN

Instruction:

• Fully engage hooks & assemble retaining pins before compressing a spring.

• Position hooks around a minimum of 4 spring coils.

• Compresses spring only until loose in spring mounts.

• Do not exceed 30 FT. LBS of torque on the actuating screw.

• Do not remove the piston rod nut until the spring is compressed enough to be loose in the mount.

Description:

• Tool compresses springs of 4" to 8" OD with wire diameters of 7/16" to 11/16"

• Works both by hand or impact wrench

• The jaws of the compressor are held in place by safety locking pins

• Use most of spring compressor quickly and easily on the bench or on the vehicle